High Performance Router + Cable Modem

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation. Uses: • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM • Voice

Size: 35 Feet/10.66 Meters Color: Yellow Brand: Cables To Go Model: 25039 Original language: English Number of items: 1 Dimensions: 2.00" h x 6.00" w x 7.00" l, .75 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Jacket: PVC, Conductor: 4-pair (UTP) 24 AWG stranded copper Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews See all customer reviews...

The new Actiontec 54 Mbps Wireless DSL Gateway is really many devices rolled into one. It's a full rate ADSL modem that's upgradeable to the new, faster ADSL 2/2+protocol. It's a router, capable of networking up to four computers, via embedded ethernet ports, with a minimum amount of hassle. And, it's a wireless device, allowing you to have the freedom to connect to the Internet without being anchored by cables or cords, surfing at more than 5 times the speed of older devices. The Gateway's modem engine can be upgraded to ADSL2, the new DSL standard that enhances modem performance by tripling the available bandwidth from 8 Mbps to 24 Mbps. There's more room for voice data, as well, so you can offer low-cost Internet telephone conversations. To help with setting up the Gateway, Actiontec has developed ground-breaking Installation Buddy. A step-by-step visual setup guide, the Installation Buddy provides simple, straightforward instructions for procedures that were once the province of IT professionals. With this Wireless DSL Gateway, your customers will get it all: flexibility, simple installation and trouble-free operation. Traffic Control with Virtual Server (max 64 configurable servers), special applications, Gaming types & Ubicom Stream Engine Feature Stream Engine Technology by Ubicom provides QoS traffic prioritization of online games, VoIP calls, and streaming video to reduce lag time and jitter UPnP (Universal Plug & Play) & ALGs Support for Internet applications such as Email, FTP, Gaming, Remote Desktop, Net Meeting, Telnet and more Provides Additional Security of Enable/Disable SSID, Internet Access Control (Services, URL and MAC Filtering) Flash Memory for Firmware Upgrade, Save/Restore Settings Easy Management via Web Browser (HTTP) and Remote Management Supports 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK LED Indicator - Power, LAN1-LAN4, WAN, WLAN Power Adapter - 5V DC, 2.5A External

Amazon Sales Rank: #59668 in Consumer Electronics Brand: Actiontec Model: GS583AD3A-01 Dimensions: 2.00" h x 9.00" w x 6.00" l, 3.00 pounds Wi-Fi Compliant with IEEE 802.11n (draft) and IEEEE 802.11b/g Standards 4x 10/100Mbps Auto-MDIX LAN Port and 1x 10/100Mbps WAN Port (Internet) Supports Cable/DSL Modems with Dynamic IP, Static IP, PPPoE, PPTP and L2TP Built-in 3 External Antennas to support high-speed performance and great coverage Firewall features Network Address Translation (NAT), and Stateful Packet Inspection (SPI) protects against Dos attacks

Most helpful customer reviews 3 of 3 people found the following review helpful. Actiontec 54 wireless 4 port By Mark The actiontec 54 wireless dsl, was easy to set up, and works great. The step by step instructions on the cd are easy to follow, had it up and running in ten minnets,and the wireless working in 5 minnets.... 2 of 2 people found the following review helpful. Wireless Modem By Melissa M. Phillips Works like a charm. It was so easy to setup and has been no hassle to use. Good product. Don't even know that it's there, it works so well. 2 of 2 people found the following review helpful. No Problems with This Modem By John The Actiontech Wireless DSL Gateway/Modem is a satisfactory (in every way, including price) piece of electronics. It was reasonably easy to install and get up and running with little or no hassle. The status LED's are an especially nice touch, as they let you know that all is OK or not OK as the case may be and give an indication of a problem. I also like the wall-mount feature (all that are needed are two flat-head screws and a wall. See all 5 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation. Uses: • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM • Voice

Size: 5 Feet/1.52 Meters Color: White Brand: Cables To Go Model: 25029 Original language: English Number of items: 1 Dimensions: .50" h x 6.00" w x 9.00" l, 1.00 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Jacket: PVC, Conductor: 4-pair (UTP) 24 AWG stranded copper Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 1 of 1 people found the following review helpful. Great Purchase! By VickiLynn This cable was an excellent buy and we got it really quickly (two days I think). We bought it to hook my son's X-box 360 up to our cable router, rather than spend $100 on the wireless device. It works fine and found that I don't need to spend $40 on a cable in a store. I will never buy cables in a store again. 1 of 1 people found the following review helpful. Bad, bad, bad cable... Stay away By L. Turk I would have thought that the cable would have been tested before shipping, so I consequently did not test it myself...I feel completely devastated because it took a lot of time and work to run it behind and through heavy furniture, etc. The cost of the cable is a drop in the bucket compared to the loss I'll have to take to run a different cable and do the whole thing over again, for I cannot charge the client for a redo because of a bad cable.I'm hoping that the cable is just badly crimped, for I can fix that and recrimp it without having to start all over again. It even looks like it might have been hand-crimped to begin with. The cable is exactly as it looks- not moulded nor snagless.I would recommend to anyone to stay away from this and do it yourself, or spend a little more money for a better cable... Cheap has turned out to be expensive in this case.This might be one bad one out of a thousand, but that doesn't matter to me because this one defective one has cost me a bundle. 1 of 1 people found the following review helpful. Excellent buy! By Xiomara Cabrera I am so glad I made the decision to buy this cable; I had wireless before and I was losing connection most of the time. After I bought this cable I have not been disconnected once! See all 3 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 150 Feet /45.72 Meters Color: Yellow Brand: Cables To Go Model: 19349 Number of items: 1 Dimensions: 3.00" h x 8.75" w x 7.75" l, 3.25 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 0 of 0 people found the following review helpful. Works By TheAquamanTom It's a cable that works and nothing else. The only thing I wish Cables To Go would do is have some sort of Variety pack of different colors. 0 of 0 people found the following review helpful. Very good quality and opportunities for color coding By Noni I bought this cable and two other colors of the same brand 8 months ago, and they've been working fine. I've been getting my cables from Cables To Go since the mid-90's and they've always been very high quality at a great price. Highly recommended! 0 of 0 people found the following review helpful. Patch Cable By Michael E. Grimes What can I say they are patch cables. Works like they are supposed to and good price. See all 5 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation. Uses: • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM • Voice

Size: 100 Feet/30.48 Meters Color: Yellow Brand: Cables To Go Model: 22164 Number of items: 1 Dimensions: 2.75" h x 7.00" w x 7.00" l, 2.20 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Jacket: PVC, Conductor: 4-pair (UTP) 24 AWG stranded copper Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews See all customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 200 Feet/60.96 Meters Color: Gray Brand: Cables To Go Model: 19145 Number of items: 1 Dimensions: .0" h x .0" w x .0" l, 1.00 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 1 of 1 people found the following review helpful. Problem solved By Chas Law How much can one say about a cable? Well, some cables are noticeably cheap and nasty and some are obviously designed for use with super computers. This one falls into the middle ground that fits almost every home user. In a nutshell, if you have a computer in a different room to your modem or router then this cable does the job nicely. The toughest thing is the DIY job you have to do to get it under floors and/or through walls. The snagless protectors do what they are supposed to do so if you need to move the cable then the release catch cannot "grab" hold of other cables. Particularly one of the million strands of spaghetti that hang down behind our computer desks. We've all been there trying to unhook the cable we are trying to pull out from under the desk which usually ends up with us banging our heads on the keyboard tray.So, nice price for 50' of cable that works perfectly and it easy to use if you're moving it at all. Job done, .. oh, except for drilling those holes and crawling through the crawl space. 1 of 1 people found the following review helpful. Very good price By Conrad D. Shull Price was very good with speedy delivery. Would cost about 10 times as much at a RS store 1 of 1 people found the following review helpful. Works As Expected By SlatMan This cat5 cable performs exactly as expected. It was ran through 3 walls and an attic and has worked flawlessly. If you need guaranteed high speed performance, then this cable works. See all 16 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 150 Feet/45.72 Meters Color: Black Brand: Cables To Go Model: 19381 Number of items: 1 Dimensions: 4.00" h x 7.00" w x 8.25" l, 3.07 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 2 of 2 people found the following review helpful. A good investment By D. Lakhan I purchased this item with some reservations. I have no regrets the cable is solid. I have squeeze these clips through some narrow spaces with no problems the anti-snag clips work like a charm it did not hook up on anything. Good item good prices and a great deal. 0 of 0 people found the following review helpful. Great Cables By Jellicoe These are great little cables. And they truly do no snag. So if you like a rats nest less path to whatever your going to network to, these are the ones to go with. Plus they are black, and the kats have yet to chew a hole into them despite the concerted effort. 0 of 0 people found the following review helpful. Excellent cables By Visor Boy I ordered four of these and all of them work great. They have just the right amount of stiffness to neatly lay upon the edge of the floor. The connectors are secure yet simple to squeeze to disengage. See all 8 customer reviews...

WIRELESS CABLE/DSL ROUTER G with MIMO

Brand: Belkin Model: F5D9230-4 Platform: Windows Format: CD Number of items: 1 Dimensions: 4.00" h x 10.00" w x 11.50" l, 2.02 pounds CPU: Intel Pentium 4 2.1 GHz Memory: 4GB SDRAM Hard Disk: 320GB Processors: 1 Up to 1000 ft. of wireless range 10 times faster than 802.11b and double the speed of 802.11g Guaranteed interoperability with Belkin's G Plus MIMO, Pre-N and legacy 802.11b/802.11g devices Improves performance of legacy 802.11g and 802.11b networking devices Wi-Fi certified for secure network connection

From the manufacturer Share music, movies and data files among all your computers with wireless convenience. Everyone can get in on the high-speed action - ideal for homes and small office settings. Belkin's Wireless G Plus MIMO (Multiple Input Multiple Output) products are based on a smart antenna technology that builds upon the widely deployed 802.11g standard by increasing speed, coverage, and reliability of wireless systems. Wireless G Plus MIMO is ideal for users looking for greater range and faster speeds for downloading music from the Internet, sharing photos, and gaming online. Wireless G Plus MIMO is a smart radio technology that enhances the 802.11g wireless standard by providing increased speed, coverage, and reliability for wireless systems. Ideal for homes with multiple wireless-enabled computers, Wireless G Plus MIMO provides a wider coverage area for downloading music from the Internet, sharing photos, and gaming online. Its design helps combat distortion and interference that lets the Belkin products send data streams farther and more reliably. Advantages Up to 1000 ft. of wireless range: Belkin G Plus MIMO delivers the industry's best wireless coverage, extending your range with improved reliability and fewer drops 10x the wireless speed: 10 times faster than 802.11b and double the speed of 802.11g Guaranteed interoperability: G Plus MIMO is Wi-Fi certified and seamlessly interoperates with a mixture of Belkin's G Plus MIMO, Pre-N, and legacy 802.11b/802.11g devices Improves performance of legacy 802.11g and 802.11b networking devices: In mixed networking environments, Belkin G Plus MIMO products increase 802.11g and 802.11b performance up to 10% Wi-Fi certified for secure network connection

Most helpful customer reviews 92 of 95 people found the following review helpful. There are three different versions with this model number By DS The original version of this router was version 1000, based on the same platform as Belkin's F5D8230-4 Pre-N and the Linksys WRT54GX routers using Airgo's v1 technology and a Broadcom engine. It got an excellent review from Tom's Networking guide.Then Belkin put a whole new circuit bard inside the same case and called it Version 2000. It used Airgo's v2 technology and a Realtek engine, and got roundly criticized on the equipment forums for being an inferior product.The latest version is 3000, which isn't even based on Airgo technology any more. Now Belkin is using Ralink technology, and it's essentially the same router as the Airlink AR-525W, SparkLAN WRTR-300 or Compusa's store brand MIMO router, any of which can be found in stores for about 25 bucks. The version 3000 technology bears no resemblance to the Airgo version that got such a good review at Tom's. In fact, the router with the Ralink chipset (the Airlink) came in dead last and was the only one to receive a rating of "not recommended" in Tom's roundup.Of course there's no way to tell in advance which version you'll get, but it's a pretty good bet you'll get the latest one. The only way to tell is to look at the sticker on the bottom of the box.This practice of changing the internal electronics without changing the model number is a really annoying practice. It's hard enough to do all your research and decide which model to buy, so then to end up with something entirely different from what you thought you were getting is just maddening. Your best bet is to just stay away from this one. 20 of 20 people found the following review helpful. Completely without Value By Beanhauer This router drops my connection every few minutes. I've spent hours on the phone with Belkin and replaced the whole thing. A quick internet search finds dozens of people reporting the same problem, with no solution offered.It's just no good. 10 of 11 people found the following review helpful. Great Router By Arshad M. Raja great router, much better than dlink, better than netgear and linksys. i used to have belkin 54g wireless router, but due to setup restriction i wasnt getting full signal with it in my room upstairs on the 2nd floor. upgraded from 54g to mimo and now i am getting almost 100% signal strength on the top floor. make sure you match it up with a mimo lan card to get the max strangth. i used this router with a 802.11b lan card and still got about 90% signal strength on the top floor. the setup is very easy and straight forward. much hassle free than netgear. it took me hours (literelly) to setup the netgear 108 router for her and still it was acting, where as it took me about 10 minutes to set up this belkin mimo. good job and product belkin. oh yeah dont forget, belkin has lifetime support and warranty. might come in handy in the long run. netgear and linksys has only 3 years i believe. See all 32 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN, 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM, Voice; T1

Size: 25 feet/7.62 Meters Color: Blue, 25 Pack Brand: Cables To Go Model: 29022 Number of items: 1 Dimensions: 1.00" h x .48" w x 300.00" l, 16.60 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Standard: Category 6 TIA/EIA-568-B-2.1, draft 9 Lifetime Warranty

Most helpful customer reviews See all customer reviews...

D-LINK DI-714P+ - The AirPlus Enhanced 2.4GHz Wireless Router combines next generation 802.11b Digital Signal Processing ( DSP ) technology from Texas Instruments with D-Link's own robust firewall security features, for simple installation and comprehensive management settings. Fully compatible with the IEEE 802.11b standard, and interoperable with all existing 802.11b compliant devices Supports 64/128/256-bit WEP encryption Built-In Print Server - Includes Parallel port to connect a printer, along with Windows based print server software application Dimensions - 1.3H x 6.5W x 9.25L; weighs about 2 pounds Three year limited warranty

Brand: D-Link Model: DI-714P+ Original language: English Dimensions: 1.50 pounds Advanced Firewall Built-in 4-port switch with print server Up to 22 Mbps and 802.11b Compatible 256-bit WEP for added security Dual high-performance detachable, omni-directional antennas

D-Link, the industry pioneer in wireless networking, introduces another performance breakthrough in wireless connectivity the D-Link AirPlus series of high-speed networking products capable of data transfer rates of up to 22Mbps. The new D-Link AirPlus DI-714P+ Wireless Router combines the latest advancements in 802.11b silicon chip design from Texas Instruments, utilizing their patented Digital Signal Processing technology, and D-Link's own robust firewall security features. The productis ideal for those creating a wireless network, as well as for more advanced users looking for additional management settings. The D-Link AirPlus DI-714P+ is the ideal networking solution for small offices, home offices, schools, coffee shops and other small businesses. A simple yet intelligent web-based setup wizard makes the DI-714P+ easy for any user to quickly and securely connect computers to share a high-speed Internet connection, files, games, and other resources. To prevent unwanted Internet intruders from accessing your private network, the DI-714P+ also serves as a feature-rich firewall through the use of filters. Filters can be set based on MAC address, IP address and Domain Names. An integrated 4-port switch allows direct connection of up to four wired computers while several wireless clients can also securely connect to the network using 64, 128, or 256-bit WEP encryption. In addition, it also features a bi-directional parallel printer port to share a printer and includes a print server application for Windows. The DI-714P+ also features a Stateful Packet Inspection (SPI) firewall which helps to protect against Denial of Service (DoS) attacks such as SYN Flood, Spoofing, and Ping of Death. ThePrinter Server software included is for Windows Operating Systems only. Postscript Level 1 and 2 printers can be connected to the DI-714P+ for Macintosh OS 9.x or X computers. The DI-714P+ does not support non-Postscript printers.

Most helpful customer reviews 11 of 12 people found the following review helpful. Works great - firmware issues to know about.... By Walker Setup: fairly straightforward. There is a "wizard" setup for those who don't like to go through every single option screen. The screen navigation is laid out in a simple, but not intuitive manner - it takes a few moments to realize the buttons on the left change with tab options at the top, but the buttons on the left don't change if there are multiple screens on the right (like "next page" or a button to press). There is no "go back a page" - they expect you to hit the button to the right that is still visible. All my complaining about that aside - it's as easy, if not easier, to navigate and find settings than both netgear and linksys.Print server: no setup available on the router - it either is or is not plugged in. Software setup for PC works fine. Did not try it with linux yet.Wireless: finally, something that works with 64/128 bit WEP. Netgear never worked. Linksys was so-so. This works. NOTE: For those who want to limit ACCESS to the WIRELESS by MAC ADDRESS - this unit cannot do it. It can limit by MAC to the INTERNET, but that will also limit who can attach to the unit, both with wireless and with a physical connection. Most other units only use this filter to limit access to the wireless portion. If used, you have to put in all the machines connecting to it - both wireless and physical....Firewall: Syslog, email logs available. Nice. SPI works. DMZ support. Passthrough ports available. Works great with my nortel VPN client (this is always a good test of PPTP and so on).FIRMWARE NOTE: I had the hardest time getting this thing to work with windows terminal services. No matter what setting I used, it would lock up then drop the connection until I rebooted the router (software reboot). Some settings would go longer, but I could get it to lock up within 2 minutes. Nothing seemed to fix it - a few people have reported this on the internet, but since most people aren't using the terminal services part of windows on a regular basis - they would never know it.The fix was to load the 1.22 firmware, not the 1.23 that came with it. This REMOVES the 802.1X authentication tab (some type of shared radius key BS - if you want radius support, get a REAL wireless device) and it removes the 4X mode for the B+ series of wireless adapters (which I do not have anyway).TO LOAD FIRMWARE: you would need to run either executable (one for MAC or the other for PC) OR use the web browser to upload the file (requires either java or activeX - not sure) because it opens up the "open file" dialog box - meaning - experimental browsers, like those in my beloved linux box - don't work well with this. ALSO - it states in no unclear terms DO NOT UPGRADE USING A WIRELESS LINK. Use a hard wired computer. I went from 1.23 to 1.22 and back and forth and so on testing this remote desktop issue.FINAL FIX: load 1.23, hit the button to reset the router to the defaults, load 1.22, reboot, hit the button to reset the router to the defaults, then type all your configuration back in.Why the crazy steps? If you loaded 1.23, typed ANYTHING in the boxes that aren't available in 1.22 - it remembers and will cause problems, even though that option isn't availble in 1.22 (I tried this - several times for fun). 1.23 -> load setup defaults -> load 1.22 -> load setup defaults -> configure.Live without their crippled version of RADIUS (if you don't know what this is you don't need it) and who cares about the crappy 4X mode for the B+ stuff? Another marketing ploy anyway.Bottom line - with some experimentation, I figured out the firmware thing. IT has worked BETTER than the linksys ever did (can we say firmware of the week?) and improved over the netgears I have used (you can print and not be disconnected from the internet - thanks a lot netgear).4 stars because firmware is supposed to fix stuff, and their two listed updates should not

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 75 Feet/22.86 Meters Color: White Brand: Cables To Go Model: 27094 Number of items: 1 Dimensions: 1.00" h x 7.50" w x 9.00" l, 1.68 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 0 of 0 people found the following review helpful. Just what I needed ! By Brian Oehlert I needed a cable that would reach my Blu-Ray player so I could allow it to hook to the internet. This was cheaper and easier than setting up a wireless link. I can now enjoy ALL the benefits my Sony Blu-Ray has to offer ! 0 of 0 people found the following review helpful. Good cable at a good price By Gary L. Lindgren I originally ordered the cable directly from Cables to Go, but it was more expensive and they didn't have what I wanted. To my surprise, they had it through amazon for less money. Not sure why it was easier to buy through Amazon but it was. 0 of 0 people found the following review helpful. Works great By Mark Twain I needed a long, cheap cable to connect TiVo to my home network, and this did the trick! Now I can transfer recorded programs to my computers to view later. See all 4 customer reviews...

Brand: CiTi Electronics Dimensions: 1.64 pounds Extremely Hi-Performance High Quality 550MHz Cat6 UTP Patch Cables Conductor: 24 AWG Stranded Copper Standard: Meets or exceeds Category 6 TIA/EIA- 568-B-2.1, draft 9 Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications Connector: 50-micron gold plated RJ-45 Male to Male

Most helpful customer reviews 1 of 1 people found the following review helpful. Cable works great, even when used for outdoor wiring. By Regular guy This cable is great and was much more cost effective than outdoor Cat6 cable. I wired 2 rooms of my house and much of the cable is running outside of the house with many bends. There were NO data issues at all. I primed and painted all cable that is outside exposed to the sun so that the sunlight doesn't ruin the cable which is not certified for outdoor use. So far it's been fine in 20-90 degree weather and I don't foresee any issues ever now that it's painted.I only run a 100mb network with very heavy video loads from my HTPC to my XBOX in another room, and I am AMAZED how well my newly wired house network performs now. I cut this cable into 40' runs and wired 2 rooms to the room with the cable modem using wall keystones at all connections. Everything worked perfectly and I now have a fully wired ethernet house that looks great. I can't tell you how nice it is and the video quality from the PC to the XBOX is far superior to wireless. Goodbye data loss, I love this cable and the price was great.I can't wait to use this cable with a gigabit network but gigabit routers aren't cheap enough yet and I haven't hit a bottleneck yet with the 100mb network with even with current heavy use. 0 of 0 people found the following review helpful. Outstanding for the Price By WillCalli I didn't expect much, and worried that the wires would not be twisted. However, this Ethernet cable was great great for the price and meet CAT6 standards. Highly recommended for home jobs. See all 2 customer reviews...

High Quality Molded Ends.Gold Plated Connectors. CAT6 ( faster thatn cat5e ). RJ45 Male to Male Ethernet

Amazon Sales Rank: #6079 in PC Accessory Brand: SF Cable Dimensions: 2.55 pounds Extremely Hi-Performance High Quality 550MHz Cat6 UTP Patch Cables Conductor: 24 AWG Stranded Copper Standard: Meets or exceeds Category 6 TIA/EIA- 568-B-2.1, draft 9 Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications Connector: 50-micron gold plated RJ-45 Male to Male

Most helpful customer reviews 9 of 9 people found the following review helpful. is what it is By larry wisecarver This product came in a timely manner and does what it is made to do. I have had no problems with it. It is being ran under the house from the modem to a PC in another room and works great. The price was great compared to others I found online. I gave 5 stars because the price was some of the best that i found, shipping was fast, and it preformed as expected and was in good condition when recieved. 2 of 2 people found the following review helpful. Ethernet cable By lpm Only issue was I didn't realize this was not stranded wire so it is pretty stiff. Order itself was shipped promptly and I have had no problems 0 of 0 people found the following review helpful. it works By MadMiguel Works like a cable should. I can't remember if it was this particular cable or another, but don't plan on cutting these cables up. The cable works better as a whole. Good luck. See all 7 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 100 Feet/30.48 Meters Color: White Brand: Cables To Go Model: 21472 Number of items: 1 Dimensions: 2.50" h x 10.00" w x 13.50" l, 2.00 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 0 of 0 people found the following review helpful. Just what I needed ! By Brian Oehlert I needed a cable that would reach my Blu-Ray player so I could allow it to hook to the internet. This was cheaper and easier than setting up a wireless link. I can now enjoy ALL the benefits my Sony Blu-Ray has to offer ! 0 of 0 people found the following review helpful. Good cable at a good price By Gary L. Lindgren I originally ordered the cable directly from Cables to Go, but it was more expensive and they didn't have what I wanted. To my surprise, they had it through amazon for less money. Not sure why it was easier to buy through Amazon but it was. 0 of 0 people found the following review helpful. Works great By Mark Twain I needed a long, cheap cable to connect TiVo to my home network, and this did the trick! Now I can transfer recorded programs to my computers to view later. See all 4 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 7 Feet/2.13 Meters Color: Gray Brand: Cables To Go Model: 15192 Platform: Windows Format: CD-ROM Original language: English Number of items: 1 Dimensions: 1.00" h x 8.00" w x 8.00" l, .18 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 1 of 1 people found the following review helpful. Problem solved By Chas Law How much can one say about a cable? Well, some cables are noticeably cheap and nasty and some are obviously designed for use with super computers. This one falls into the middle ground that fits almost every home user. In a nutshell, if you have a computer in a different room to your modem or router then this cable does the job nicely. The toughest thing is the DIY job you have to do to get it under floors and/or through walls. The snagless protectors do what they are supposed to do so if you need to move the cable then the release catch cannot "grab" hold of other cables. Particularly one of the million strands of spaghetti that hang down behind our computer desks. We've all been there trying to unhook the cable we are trying to pull out from under the desk which usually ends up with us banging our heads on the keyboard tray.So, nice price for 50' of cable that works perfectly and it easy to use if you're moving it at all. Job done, .. oh, except for drilling those holes and crawling through the crawl space. 1 of 1 people found the following review helpful. Very good price By Conrad D. Shull Price was very good with speedy delivery. Would cost about 10 times as much at a RS store 1 of 1 people found the following review helpful. Works As Expected By SlatMan This cat5 cable performs exactly as expected. It was ran through 3 walls and an attic and has worked flawlessly. If you need guaranteed high speed performance, then this cable works. See all 16 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 14 Feet/4.26 Meters Color: Black Brand: Cables To Go Model: 15208 Platform: Windows Format: CD-ROM Original language: English Number of items: 1 Dimensions: 1.00" h x 8.00" w x 8.00" l, .20 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 2 of 2 people found the following review helpful. A good investment By D. Lakhan I purchased this item with some reservations. I have no regrets the cable is solid. I have squeeze these clips through some narrow spaces with no problems the anti-snag clips work like a charm it did not hook up on anything. Good item good prices and a great deal. 0 of 0 people found the following review helpful. Great Cables By Jellicoe These are great little cables. And they truly do no snag. So if you like a rats nest less path to whatever your going to network to, these are the ones to go with. Plus they are black, and the kats have yet to chew a hole into them despite the concerted effort. 0 of 0 people found the following review helpful. Excellent cables By Visor Boy I ordered four of these and all of them work great. They have just the right amount of stiffness to neatly lay upon the edge of the floor. The connectors are secure yet simple to squeeze to disengage. See all 8 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 14 Feet/4.26 Meters Color: Blue Brand: Cables To Go Model: 15206 Format: CD-ROM Original language: English Number of items: 1 Dimensions: .80" h x 5.60" w x 7.00" l, .33 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 4 of 4 people found the following review helpful. Good quality cables. By Noni I bought this cable and two other colors of the same brand 8 months ago, and they've been working great. They come in different colors for color coding your connections, which is nice. I've been getting my cables from Cables To Go since the mid-90's and they've always been very high quality at a great price. Highly recommended! 2 of 2 people found the following review helpful. Great product, great price.... By JEagle This 50' cable was a great price and worked well for my purpose of connecting from hub to blu-ray player (running it through the attic). The snagless protectors work well, particularly when fishing through holes. 2 of 2 people found the following review helpful. Nice little cable By E. Aspilcueta I used between my modem and router. I don't need a 6 foot cable for that. Fits perfectly. See all 12 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 75 Feet/22.86 Meters Color: Blue Brand: Cables To Go Model: 22146 Number of items: 1 Dimensions: 1.50" h x 6.90" w x 9.70" l, 1.25 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 4 of 4 people found the following review helpful. Good quality cables. By Noni I bought this cable and two other colors of the same brand 8 months ago, and they've been working great. They come in different colors for color coding your connections, which is nice. I've been getting my cables from Cables To Go since the mid-90's and they've always been very high quality at a great price. Highly recommended! 2 of 2 people found the following review helpful. Great product, great price.... By JEagle This 50' cable was a great price and worked well for my purpose of connecting from hub to blu-ray player (running it through the attic). The snagless protectors work well, particularly when fishing through holes. 2 of 2 people found the following review helpful. Nice little cable By E. Aspilcueta I used between my modem and router. I don't need a 6 foot cable for that. Fits perfectly. See all 12 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation. Uses: • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM • Voice

Size: 7 Feet/2.13 Meters Color: Blue Brand: Cables To Go Model: 22685 Platform: Windows Format: CD-ROM Original language: English Number of items: 1 Dimensions: 8.00" h x 16.00" w x 16.00" l, .16 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Jacket: PVC, Conductor: 4-pair (UTP) 24 AWG stranded copper Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 0 of 0 people found the following review helpful. Great Cable By Waterman Video Prod I got this cable for my Wii. It works perfectly. It is very fast! Won't regret buying! Highly recommended! Works well for computers too. It works better than most of the cables that we paid $20 for. 0 of 0 people found the following review helpful. Cat 5 Patch Cable By Joseph G. Dinicola I needed a cable to connect my Blu-Ray Player to my Router.It was 35 feet from my Player to my Router.The cable works great and I've used it several times to download video data from the Internet to my Player.I've purchased from Cables To Go before and have always been well satisfied with my purchases. See all 2 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 5 Feet/1.52 Meters Color: Gray Brand: Cables To Go Model: 15187 Platform: Windows Format: CD-ROM Original language: English Number of items: 1 Dimensions: 1.00" h x 8.00" w x 8.00" l, .14 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 1 of 1 people found the following review helpful. Problem solved By Chas Law How much can one say about a cable? Well, some cables are noticeably cheap and nasty and some are obviously designed for use with super computers. This one falls into the middle ground that fits almost every home user. In a nutshell, if you have a computer in a different room to your modem or router then this cable does the job nicely. The toughest thing is the DIY job you have to do to get it under floors and/or through walls. The snagless protectors do what they are supposed to do so if you need to move the cable then the release catch cannot "grab" hold of other cables. Particularly one of the million strands of spaghetti that hang down behind our computer desks. We've all been there trying to unhook the cable we are trying to pull out from under the desk which usually ends up with us banging our heads on the keyboard tray.So, nice price for 50' of cable that works perfectly and it easy to use if you're moving it at all. Job done, .. oh, except for drilling those holes and crawling through the crawl space. 1 of 1 people found the following review helpful. Very good price By Conrad D. Shull Price was very good with speedy delivery. Would cost about 10 times as much at a RS store 1 of 1 people found the following review helpful. Works As Expected By SlatMan This cat5 cable performs exactly as expected. It was ran through 3 walls and an attic and has worked flawlessly. If you need guaranteed high speed performance, then this cable works. See all 16 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN, 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM, Voice; T1

Size: 7 Feet/2.13 Meters Color: Blue, 25 Pack Brand: Cables To Go Model: 29007 Number of items: 1 Dimensions: 1.00" h x .48" w x 84.00" l, 5.30 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Standard: Category 6 TIA/EIA-568-B-2.1, draft 9 Lifetime Warranty

Most helpful customer reviews See all customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation. Uses: • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM • Voice

Size: 35 Feet/10.66 Meters Color: Blue Brand: Cables To Go Model: 24896 Platform: Windows Format: CD-ROM Original language: English Number of items: 1 Dimensions: 2.00" h x 7.50" w x 6.50" l, .16 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Jacket: PVC, Conductor: 4-pair (UTP) 24 AWG stranded copper Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 0 of 0 people found the following review helpful. Great Cable By Waterman Video Prod I got this cable for my Wii. It works perfectly. It is very fast! Won't regret buying! Highly recommended! Works well for computers too. It works better than most of the cables that we paid $20 for. 0 of 0 people found the following review helpful. Cat 5 Patch Cable By Joseph G. Dinicola I needed a cable to connect my Blu-Ray Player to my Router.It was 35 feet from my Player to my Router.The cable works great and I've used it several times to download video data from the Internet to my Player.I've purchased from Cables To Go before and have always been well satisfied with my purchases. See all 2 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 500 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other Computer Networking applications. Length: 100ft Certification: TIA/EIA T568B (AT&T 258A) Wired UTP Unshielded Twist Pair CM Type PVC Jacket 24AWG 4pair Stranded Copper Wire 50 Micron Gold Plated RJ45 Plug Lifetime Warranty

Amazon Sales Rank: #10672 in PC Accessory Brand: SF Cable Extremely Hi-Performance High Quality 550MHz Cat6 UTP Patch Cables Conductor: 24 AWG Stranded Copper Standard: Meets or exceeds Category 6 TIA/EIA- 568-B-2.1, draft 9 Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications Connector: 50-micron gold plated RJ-45 Male to Male

Most helpful customer reviews 4 of 4 people found the following review helpful. Ethernet Network Cable Wire By Sassy Love this cable wire brought in April, have not had any problem, arrived fast, works great. Brought CAT 6 because it is as quoted "Extremely Hi-Performance High Quality 550MHz". 3 of 3 people found the following review helpful. Works Great ! By Mithradates I've had this cable for about 6 months now and it still works great. I purchased it for a pc that is about 75ft away from my router and there is no noticable loss of data speed from when it was 3ft from the router. I just rolled up the other 25ft that was left over. Great performance and great price! 2 of 2 people found the following review helpful. Works nicely By G. Farnsworth 100 feed of cat 6 cable. I run my gigabit network from one side of my house to the other with it and it works very nicely. I like the quality of the end connectors. I received the item quickly and it is just as I desired. See all 12 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 50 Feet/15.24 Meters Color: Black Brand: Cables To Go Model: 20038 Original language: English Number of items: 1 Dimensions: 2.00" h x 7.00" w x 7.00" l, 1.20 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 2 of 2 people found the following review helpful. A good investment By D. Lakhan I purchased this item with some reservations. I have no regrets the cable is solid. I have squeeze these clips through some narrow spaces with no problems the anti-snag clips work like a charm it did not hook up on anything. Good item good prices and a great deal. 0 of 0 people found the following review helpful. Great Cables By Jellicoe These are great little cables. And they truly do no snag. So if you like a rats nest less path to whatever your going to network to, these are the ones to go with. Plus they are black, and the kats have yet to chew a hole into them despite the concerted effort. 0 of 0 people found the following review helpful. Excellent cables By Visor Boy I ordered four of these and all of them work great. They have just the right amount of stiffness to neatly lay upon the edge of the floor. The connectors are secure yet simple to squeeze to disengage. See all 8 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation. Uses: • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM • Voice

Size: 5 Feet/1.52 Meters Color: Yellow Brand: Cables To Go Model: 22682 Platform: Windows Format: CD-ROM Original language: English Number of items: 1 Dimensions: .50" h x 5.85" w x 10.30" l, .10 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Jacket: PVC, Conductor: 4-pair (UTP) 24 AWG stranded copper Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews See all customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 1 Feet/0.30 Meters Color: Gray Brand: Cables To Go Model: 24814 Platform: Windows Format: CD-ROM Original language: English Number of items: 1 Dimensions: .40" h x 4.00" w x 5.50" l, .4 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 1 of 1 people found the following review helpful. Problem solved By Chas Law How much can one say about a cable? Well, some cables are noticeably cheap and nasty and some are obviously designed for use with super computers. This one falls into the middle ground that fits almost every home user. In a nutshell, if you have a computer in a different room to your modem or router then this cable does the job nicely. The toughest thing is the DIY job you have to do to get it under floors and/or through walls. The snagless protectors do what they are supposed to do so if you need to move the cable then the release catch cannot "grab" hold of other cables. Particularly one of the million strands of spaghetti that hang down behind our computer desks. We've all been there trying to unhook the cable we are trying to pull out from under the desk which usually ends up with us banging our heads on the keyboard tray.So, nice price for 50' of cable that works perfectly and it easy to use if you're moving it at all. Job done, .. oh, except for drilling those holes and crawling through the crawl space. 1 of 1 people found the following review helpful. Very good price By Conrad D. Shull Price was very good with speedy delivery. Would cost about 10 times as much at a RS store 1 of 1 people found the following review helpful. Works As Expected By SlatMan This cat5 cable performs exactly as expected. It was ran through 3 walls and an attic and has worked flawlessly. If you need guaranteed high speed performance, then this cable works. See all 16 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 14 Feet/4.26 Meters Color: Gray Brand: Cables To Go Model: 15205 Original language: English Number of items: 1 Dimensions: 1.00" h x 8.00" w x 8.00" l, Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 1 of 1 people found the following review helpful. Problem solved By Chas Law How much can one say about a cable? Well, some cables are noticeably cheap and nasty and some are obviously designed for use with super computers. This one falls into the middle ground that fits almost every home user. In a nutshell, if you have a computer in a different room to your modem or router then this cable does the job nicely. The toughest thing is the DIY job you have to do to get it under floors and/or through walls. The snagless protectors do what they are supposed to do so if you need to move the cable then the release catch cannot "grab" hold of other cables. Particularly one of the million strands of spaghetti that hang down behind our computer desks. We've all been there trying to unhook the cable we are trying to pull out from under the desk which usually ends up with us banging our heads on the keyboard tray.So, nice price for 50' of cable that works perfectly and it easy to use if you're moving it at all. Job done, .. oh, except for drilling those holes and crawling through the crawl space. 1 of 1 people found the following review helpful. Very good price By Conrad D. Shull Price was very good with speedy delivery. Would cost about 10 times as much at a RS store 1 of 1 people found the following review helpful. Works As Expected By SlatMan This cat5 cable performs exactly as expected. It was ran through 3 walls and an attic and has worked flawlessly. If you need guaranteed high speed performance, then this cable works. See all 16 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation. Uses: • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM • Voice

Size: 75 Feet/22.86 Meters Color: Green Brand: Cables To Go Model: 24400 Number of items: 1 Dimensions: 2.50" h x 7.50" w x 7.50" l, 1.40 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Jacket: PVC, Conductor: 4-pair (UTP) 24 AWG stranded copper Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 0 of 0 people found the following review helpful. Works great - as expected. By T. Ross There isn't much that can go wrong with this kind of item, but I'm still pleased with the quality of the cable and connectors. The cable has been used in a challenging physical and electromagnetic environment for a few years now without a hitch. It was a good value at the time I bought it too. Great color -- I get tired of beige, black, and gray all the time. See all 1 customer reviews...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat5E TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation. Uses:1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) , 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN , 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM , Voice

Size: 5 Feet/1.52 Meters Color: White Brand: Cables To Go Model: 19477 Original language: English Number of items: 1 Dimensions: .50" h x 6.00" w x 10.50" l, .5 pounds Connector 1: RJ45 Male and Connector 2: RJ45 Male Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. Connector: 50 micron gold-plated RJ45, Conductor: 4-pair (UTP) 24 AWG stranded copper Jacket: PVC, Wired: TSB 568B (AT&T 258A) Certification: TIA/EIA

Most helpful customer reviews 0 of 0 people found the following review helpful. Just what I needed ! By Brian Oehlert I needed a cable that would reach my Blu-Ray player so I could allow it to hook to the internet. This was cheaper and easier than setting up a wireless link. I can now enjoy ALL the benefits my Sony Blu-Ray has to offer ! 0 of 0 people found the following review helpful. Good cable at a good price By Gary L. Lindgren I originally ordered the cable directly from Cables to Go, but it was more expensive and they didn't have what I wanted. To my surprise, they had it through amazon for less money. Not sure why it was easier to buy through Amazon but it was. 0 of 0 people found the following review helpful. Works great By Mark Twain I needed a long, cheap cable to connect TiVo to my home network, and this did the trick! Now I can transfer recorded programs to my computers to view later. See all 4 customer reviews...